You could be considering, “Aren’t journal file holder already straightforward to seek out and fairly low cost?” It will get even simpler and cheaper, my pal. One sheet of plywood = EIGHTEEN information! At $3.50 per top-grade plywood file, I used to be completely on board.
I used to be impressed by Ana White’s plans for a similar, and I adopted her lower listing on a 4’ x 4’ sheet of plywood (half of a full-size sheet). One full sheet makes 18 information!! I made 9 and even that felt beneficiant.
To make 9 wooden journal file holders, you have to:
- 1 half-sheet (4′ x 4′) of plywood, 1/4″ thick. (Use a full sheet for 18.) I sprang for hardwood ply, as a result of I’m price it.
- 1×4 size of timber, 8’ lengthy. Technical observe: my piece was really 19mm x 90mm x 2.4m, due to the metric system. The precise dimension is almost the identical.
- PVA glue
- High quality painter’s tape
- Clamps (elective)
- Finishings of your alternative: paint, varnish, decoupage paper, and so forth
How you can make the Wood Journal File Holder: Step by Step Challenge
Reduce the board into three 10″ huge strips and three 4″ huge strips, as proven. In case you ask properly on the ironmongery store, they’ll lower the strips for you. You may noticed by the rest with whichever noticed you’ve got at residence, even a hand noticed if obligatory.
I used a round noticed to make the lengthy cuts. (To information it on a straight line, I clamped a spare 1×4 to the plywood to behave as a information for the noticed.) The brief cuts had been performed on a drop noticed, which was straightforward to set on a 30º angle.
- Utilizing the 4” strips, lower 9 items which can be 6¼” lengthy.
- Utilizing the 4” strips, lower 9 items which can be 12” lengthy.
- Utilizing the 1×4, lower 9 items which can be 10” lengthy.
So that you’ve received all of your items lower. Nice! Time for meeting. These are the items you want for every file.
Glue the bottom piece to the underside edge of 1 aspect, centered. Then glue the opposite aspect piece to the bottom. Tip: use a spare 1×4 part to prop up the piece whereas gluing.
Use painter’s tape to carry collectively all of the items as you glue them collectively – sides, entrance after which again.
(When you have clamps, additionally they do the job – however I discovered the tape to be gentler and simpler for positioning the timber.)
I left the glue to dry in a single day. The following day, I added a contact of wooden putty in a number of the cracks for a flush end. A lightweight sand took care of any mess from the glue and putty.
My items of plywood had been beginning to seem like journal information!
I went for a quite simple end on these information, in an identical vein to my Scandi dresser makeover: I used danish oil on the edges and semi-gloss paint for the fronts and backs.
(As an additional precaution, I even put little felt toes on the bases.)
I gave them one other couple of days for the finishes to remedy, after which excitedly positioned them in my research.
Associated: 46 Superior DIY Wooden Initiatives For Absolute Newbies
Fairly good-looking, hey? I just like the extreme profile of my information, all straight strains and solid-coloured panels. I’ve a factor for Scandinavian-influenced minimalism!
There are such a lot of concepts for customizing them with your individual designs: polka dots, crosses, stencils, stripes, chalkboard paint, decoupaged paper with mod podge… it’s countless. You may as well discover label plates at a craft retailer and add these on, too. I maintain my information mag-side out so I didn’t fear about it.
This bookshelf is trying tidier than ever. (There’s 5 right here, however the different 4 are about to hitch the crew very quickly.) Even IKEA couldn’t promote me wood journal information this cheaply — in case you want a great deal of these, undoubtedly give it a shot making your individual!
